Untitled Document
>> View Cart/Checkout

>> Find Products


(by product number)


>> Search

Polyurethane Products

Adornador Door Surrounds

The Adornador system allows you to create your own elegant interior or exterior door surround or window treatment. All components are made of rigid polyurethane and can be cut with a standard hand saw and nailed or screwed in place. All parts are fully primed, ready to be painted using any paint. You can use as few or as many Adornador door trim components as you wish in your design.

The four door surrounds shown below illustrate some of the options you have for your own design.
 

Click to view the components:

  Door (1) uses the D307 Pineapple Pediment mounted above the H430 Header and H440 Keystone. Two P508 8 inch Pilasters are used without capitals.

Door (2) is similar but the 8 inch Pilasters are replaced by two P506 6 inch Pilasters and two C106 Ionic Capitals are added.

Doors (3) and (4) use Coped Capitals with a Frieze and P506 6 inch Pilasters. Coped capitals are notched to fit over the left and right ends of any of the five available friezes.

Door (3) uses the D306 Peaked Pediment with the O401 Pediment Ornament.

There are many more options available to you for your Adornador design.

View Installation Steps Here.


Adornador® Door Trim System Components

Click any Adornador component below for a larger image or a dimensioned drawing.
S3753-PL & S3754-PL

Click to view the installed image.

S3753-PL
$50.07
W: 5-1/4", H: 95-1/2", P: 1-3/4"
 
S3754-PL
$44.89
W: 4-1/4", H: 95-3/16", P: 1-3/4"
 

 Door Surround Sets
P202 Fluted Set and P202 Dentil Set are designed to be used with maximum door width of 80" and door height of 83-1/2".
P202 Fluted Set
P202 Dentil Set



$94.75
Maximum door width of 80" & door height of 83-1/2"
 



$94.75
Maximum door width of 80" & door height of 83-1/2"
 

The D307 Pineapple Pediment and D306 Peaked Pediment are designed for use with the H430 Triglyph Header and the H440 Keystone. The header and keystone let you adapt a pediment to any width doorway.
D307-PL
60-1/2" x 12-5/8", Projection: 4-1/8"
 
Pineapple Pediment
$162.11
 

D306-PL
60-1/2" x 14-1/2", Projection: 4-1/8"
 
Peaked Pediment
$162.11
 

O401-PL
14" x 5", Projection: 3/4"
The O401 is designed to be mounted inside the
D306 Peaked Pediment
 

Pediment Ornament
$14.80

 
The H430 Triglyph Header and H440 Keystone can be used with or without a pediment. When used with a pediment, they let you adapt the pediment to any width doorway. Simply cut out excess width at the center of the header and cover the joint with the keystone.
H430-PL
Triglyph Header

$73.95
97" x 5-7/8", Projection: 4"
 


H440-PL
Keystone

$11.73
4-7/8" x 5-3/4", Projection: 3-5/8"
 

 
The plain section at the bottom of each pilaster is 16 inches tall. You can trim the bottom off of a pilaster to adjust it to the height requirements of your installation. You can either remove just part of the plain section or, for a shorter installation, remove all of it and let the flutes end open.
  P504-PL 4 inch Fluted Pilaster
$45.30
4-1/4" x 90", Projection: 1-1/4"
 

 
P506-PL 6 inch Fluted Pilaster
$64.25
6" x 90", Projection: 1-1/4"
 

 

P508-PL 8 inch Fluted Pilaster
$80.45
8" x 96", Projection: 1-1/4"
 

 

Regular capitals are sold individually. Three styles are available for use with either 6 inch or 8 inch pilasters. Use regular capitals in any door trim design which does not include a frieze or when creating a stand-alone pilaster.
6 inch:
W: 8-1/2"
H: 7-1/2"
Proj'n: 2-1/2"
Supplied & priced
individually

C106-PL Ionic
$23.17
 


C108-PL Renaissance
$23.17
 


C110-PL Doric
$23.17
 


8 inch:
W: 10-3/4"
H: 12-3/8"
Proj'n: 2-1/2"
Supplied & priced
individually

C206-PL Ionic
$27.40
 


C208-PL Renaissance
$27.40
 


C210-PL Doric
$27.40
 


 
Coped capitals are sold in pairs. They are notched to fit over the left and right ends of any of the five friezes. Use coped capitals in any door trim design which includes a frieze.

4 inch:
W: 6-1/2"
H: 7-1/2"
Proj'n: 2-1/2"
Supplied & priced
in Pairs

C105-PL Renaissance
$46.32
 


C103-PL Colonial
$46.32
 


6 inch:
W: 8-1/2"
H: 7-1/2"
Proj'n: 2-1/2"
Supplied & priced
in Pairs

C107-PL Ionic
$46.62
 

C109-PL Renaissance
$46.62
 

C111-PL Doric
$46.62
 

8 inch:
W: 10-1/2"
H: 7-1/2"
Proj'n: 2-1/2"
Supplied & priced
in Pairs
 
C209-PL Renaissance
$54.22
 

 

H301-PL   Acroter Frieze
$64.25
92-3/8" x 7-1/2", Projection: 1-3/4"
 


H302-PL Flute Frieze
$64.25
89" x 7-1/2", Projection: 1-3/4"
 


H410-PL Urn Frieze
$64.25
87" x 7-1/2", Projection: 1-3/4"
 


H420-PL Palmette Frieze
$64.25
89-1/4" x 7-1/2", Projection: 1-3/4"
 


H310-PL Regal Frieze
$64.25
92-3/8" x 7-1/2", Projection: 1-3/4"
 

 Brackets
Brackets can be used inside passageways or as decorative shelf supports. Two brackets can also be used in place of capitals and pilasters in a door trim design.
B804-PL   Small Modillion Bracket
$28.70
4" x 6-3/4", Projection: 3-3/8"
 


B806-PL Large Modillion Bracket
$45.76
6" x 8-1/2", Projection: 4"
 

Door Surround Design Tool:

  The Adornador Door Surround Selector lets you choose a pilaster width, add capitals, a frieze and a pediment if you wish, then instantly view your design complete with a full components list and total configuration price. You can then add your design to your shopping cart with just two clicks.

 
Copyright ©2014 Vitek Inc. All rights reserved.
Manufacturer of BALMER Moldings - Crown Molding, Architectural Millwork and Trim